Epilog Fusion M2 Laser Series
The Fusion M2 Laser Series with DUAL SOURCE LASER capabilities (fiber and C02) is Epilog’s most advanced concept in laser system design. Available in two sizes, the Fusion M2 32 and the larger Fusion M2 40. Featuring new motion control design and job management software, along with the industry’s highest quality flame-polished edge cuts, large viewing door with LED lighting and Epilog’s highest engraving and cutting speeds yet.
All Epilog Laser Systems are 100% designed, engineered and built in the USA.
STANDARD FEATURES
- Made-in-the-USA Quality
- Higher-Resolution RADIANCE™ Standard Optics
- SUPER-SILENT™ Cooling Fans
- CO2 Waveguide Laser Tubes by Epilog
- Long-Lasting Steel Bearings
- Strong, Long-Lasting Drive Belts
- Superior Chassis Strength
- Joystick Controls
- Advanced Motion Control
- Flame Polished Edge Cuts
- Temperature Sensor/Emergency Stop Button
- Motorized Table
FREE EPILOG BROCHURE
Laser Dashboard™ Print Driver
The Laser Dashboard™ controls your laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.
Super-Silent™ Cooling Fans
With the Super-Silent™ Cooling Fans available exclusively from Epilog Laser, you can run your laser equipment with minimal background noise. The Super-Silent Cooling Fans make for a much more comfortable and productive work area.
Flame Polished Edge Cuts
You can now achieve the best edge quality on laser-cut acrylic that we’ve ever seen on a small-format laser system. The premier motion control also provides the fastest cutting on thin materials.
Higher-Resolution Radiance™ Standard Optics
No additional, expensive lens packages needed for the highest resolution engraving with our Radiance Optics. With any laser system over 24″ in carriage length, the Radiance Optics package is included to provide higher quality, more consistent beam accuracy across the entire table.
Fusion Laser Safety Features
Epilog have built-in a temperature sensor into the Fusion as well as including an Emergency Stop Button. These built-in features not only help ensure the safety of your employees and workspace.
Job Manager Software
The Epilog Job Manager is a great time saver and organizational resource for you. From one place you can access any job you have sent to the laser, view the settings you used on any past job, re-run projects, access your material database & more.
Epilog Fusion M2 32 Laser: With a large table size of 812 x 508 mm (32″ x 20″), the Fusion M2 32 is Epilog’s newest product offering! The high-quality engraving across the entire table is a result of the highest-quality components, high-speed servo motors, and the exciting optional Dual Source and Camera Registration options. | |
Epilog Fusion M2 40 Laser: With an oversized table of 40″ x 28″ (1016 x 711 mm), the Fusion M2 40 features Epilog’s largest work area. This machine was designed to engrave the same high-quality image at any point on the table by |
- Made-in-the-USA Quality
- Higher-Resolution Radiance™ Standard Optics
- SUPER-SILENT™ Cooling Fans
- CO2 Waveguide Laser Tubes by Epilog
- Long-Lasting Steel Bearings
- Strong, Long-Lasting Drive Belts
- Superior Chassis Strength
- Joystick Controls
- Advanced Motion Control
- Flame Polished Edge Cuts
- Temperature Sensor/Emergency Stop Button
- Motorized Table
Dual Source Option: CO2 and FiberAdd the fiber laser’s metal etching capabilities to the CO2 laser’s versatility. Are you looking for the material versatility of a CO2 laser in addition to the direct metal etching of a fiber laser? Add on the dual source option to your Fusion M2 32 or Fusion M2 40 by choosing both a CO2 laser (50, 60 or 75 watts) and a fiber laser (30 or 50 watts) to work with a wider range of materials. | |
Epilog eView Camera ModuleAdd laser cutting to your printed projects with our unique three camera design. The easiest, most precise method of cutting printed graphics on wood, cardboard, acrylic, paper, and more. Simply add registration marks to your printed graphic and produce precise laser cuts. The eView features three cameras located inside the system to increase cutting accuracy, including two built into the lid for the easiest positioning of projects. | |
Fusion Rim-Drive Rotary AttachmentThe Standard Rim-Drive Rotary Attachment allows you to engrave wine bottles, mugs, glasses and more.Available for the Fusion Laser, the Standard Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item up to 10.25″ (260 mm) in diameter. The Fusion Laser rotary attachment has been built to accommodate a large variety of shapes and sizes. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser! | |
Fusion 3-Jaw Chuck Rotary AttachmentWhen more precision is required, the 3-Jaw Chuck Rotary Attachment is the ideal choice. Only available for the Fusion Laser, the 3-Jaw Chuck mechanically clamps a cylinder or oddly-shaped, non-cylindrical item place as the laser engraves. The Fusion Laser rotary attachment has been built to accommodate a large variety of shapes and sizes. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser! | |
Vector Cutting TableRaises laser cut materials off the table for better edges. Incorporate the gridded cutting table on your Fusion laser system when cutting through materials. By raising the materials when cutting off the table, you’ll be able to reduce the back-side burning on the material. | |
PhotoLaser Plus SoftwarePhoto processing software that optimizes your photographs for engraving on a variety of materials. PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials. Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers? Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry. | |
Optional LensesIn addition to the 2.0″ lens (or 3.0″ lens on the dual source), we offer special lenses for specific applications. 1.5″ Lens: Highest-Resolution Engraving Although the standard 2.0-inch lens provides amazing detail, our 1.5-inch lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts. 4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas The 4.0-inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials. Cone Lens: Deep Cutting with the LaserThe Cone design pushes the stream from the Air Assist down directly through the cut, rather than over the surface of the engraving material. This provides an even better reduction of laser flare-ups and better edge quality. | |
Vector Pin TableThe Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handily removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table. | |
Air CompressorEpilog’s optional Air Compressor is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area. This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and the connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system. |
Epilog Fusion M2 32 | Epilog Fusion M2 40 |
CO2: 30, 40, 50, 60, 75, or 120 watts Fiber: 30 or 50 watts Dual source: CO2 50, 60, or 75 watts; | CO2: 30, 40, 50, 60, 75, or 120 watts Fiber: 30 or 50 watts Dual source: CO2 50, 60, or 75 watts; |
Epilog Fusion M2 32 Fiber | Epilog Fusion M2 40 Fiber | |
Engraving Area | 32″ x 20″ (812 x 508 mm) | 40″ x 28″ (1016 x 711 mm) |
Focal Length (F-Theta Lens) | 3″ (76.2 mm) | 3″ (76.2 mm) |
Maximum Material Thickness | 12.5″ (317 mm) | 12.25″ (311 mm) |
Laser Wattage | 30 or 50 watts | 30 or 50 watts |
Laser Type | Solid State Pulsed Ytterbium Fiber Laser (air cooled) | Solid State Pulsed Ytterbium Fiber Laser (air cooled) |
Mode of Operation | Pulsed 20-80 kHZ | Pulsed 20-80 kHZ |
Repetition Rate (Frequency) | 20 kHZ – 100 kHz depending on the laser wattage. | 20 kHZ – 100 kHz depending on the laser wattage. |
Intelligent Memory Capacity | Multiple file storage up to 128 MB. | Multiple file storage up to 128 MB. |
Laser Source | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
Size (WxDxH) | 52.5″ x 33.75″ x 40.75″ (1334 x 857 x 1035 mm) 37.75″ (959 mm) deep with exhaust plenum. | 60.5″ x 41.25″ x 42.25″ (1537 x 1048 x 1073 mm)) 43″ (1092 mm) deep with exhaust plenum. |
Weight | 500 lbs (227 kg) Dual Source: 536 lbs (243 kg) | 643 lbs (292 kg) Dual Source: 679 lbs (308 kg) |
Electrical Requirements | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
Maximum Table Weight | 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting. | |
Ventilation System | External exhaust or internal filtration system is required via two 4″ (101.6 mm) output ports. | External exhaust or internal filtration system is required via two 4″ (101.6 mm) output ports. |
Epilog Fusion M2 32 Laser: With a large table size of 812 x 508 mm (32″ x 20″), the Fusion M2 32 is Epilog’s newest product offering! The high-quality engraving across the entire table is a result of the highest-quality components, high-speed servo motors, and the exciting optional Dual Source and Camera Registration options. |
Epilog Fusion M2 40 Laser: With an oversized table of 40″ x 28″ (1016 x 711 mm), the Fusion M2 40 features Epilog’s largest work area. This machine was designed to engrave the same high-quality image at any point on the table by |
- Made-in-the-USA Quality
- Higher-Resolution Radiance™ Standard Optics
- SUPER-SILENT™ Cooling Fans
- CO2 Waveguide Laser Tubes by Epilog
- Long-Lasting Steel Bearings
- Strong, Long-Lasting Drive Belts
- Superior Chassis Strength
- Joystick Controls
- Advanced Motion Control
- Flame Polished Edge Cuts
- Temperature Sensor/Emergency Stop Button
- Motorized Table
Dual Source Option: CO2 and FiberAdd the fiber laser’s metal etching capabilities to the CO2 laser’s versatility. Are you looking for the material versatility of a CO2 laser in addition to the direct metal etching of a fiber laser? Add on the dual source option to your Fusion M2 32 or Fusion M2 40 by choosing both a CO2 laser (50, 60 or 75 watts) and a fiber laser (30 or 50 watts) to work with a wider range of materials. |
Epilog eView Camera ModuleAdd laser cutting to your printed projects with our unique three camera design. The easiest, most precise method of cutting printed graphics on wood, cardboard, acrylic, paper, and more. Simply add registration marks to your printed graphic and produce precise laser cuts. The eView features three cameras located inside the system to increase cutting accuracy, including two built into the lid for the easiest positioning of projects. |
Fusion Rim-Drive Rotary AttachmentThe Standard Rim-Drive Rotary Attachment allows you to engrave wine bottles, mugs, glasses and more |
Fusion 3-Jaw Chuck Rotary AttachmentWhen more precision is required, the 3-Jaw Chuck Rotary Attachment is the ideal choice. Only available for the Fusion Laser, the 3-Jaw Chuck mechanically clamps a cylinder or oddly-shaped, non-cylindrical item place as the laser engraves. The Fusion Laser rotary attachment has been built to accommodate a large variety of shapes and sizes. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser! |
Vector Cutting TableRaises laser cut materials off the table for better edges. Incorporate the gridded cutting table on your Fusion laser system when cutting through materials. By raising the materials when cutting off the table, you’ll be able to reduce the back-side burning on the material. |
PhotoLaser Plus SoftwarePhoto processing software that optimizes your photographs for engraving on a variety of materials. PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials. Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers? Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry. |
Optional LensesIn addition to the 2.0″ lens (or 3.0″ lens on the dual source), we offer special lenses for specific applications. 1.5″ Lens: Highest-Resolution Engraving Although the standard 2.0-inch lens provides amazing detail, our 1.5-inch lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts. 4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas The 4.0-inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials. Cone Lens: Deep Cutting with the LaserThe Cone design pushes the stream from the Air Assist down directly through the cut, rather than over the surface of the engraving material. This provides an even better reduction of laser flare-ups and better edge quality. |
Vector Pin TableThe Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handily removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table. |
Air CompressorEpilog’s optional Air Compressor is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area. This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and the connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system. |
Epilog Fusion M2 32 | Epilog Fusion M2 40 |
CO2: 30, 40, 50, 60, 75, or 120 watts Fiber: 30 or 50 watts Dual source: CO2 50, 60, or 75 watts; | CO2: 30, 40, 50, 60, 75, or 120 watts Fiber: 30 or 50 watts Dual source: CO2 50, 60, or 75 watts; |