Zing Laser Series
The Epilog Zing Laser Starter Series is Epilog’s small format, high-quality engraving line. Perfect for everything from home use to starting a business, the Epilog Zing Laser features high-quality engraving, at the low cost for which you’re looking.
Whether you’re looking for your first laser to start out in the engraving and cutting industry, or adding a second laser to your line, the Epilog Zing is a great choice with its excellent engraving quality and low price.
STANDARD FEATURES
- Intelligent Memory Capacity
- Air Assist
- Laser Dashboard
- Red Dot Pointer
- Relocatable Home
- High-Speed Parts Marking Over a Larger Work Area
- Open Architecture Software Interface
- Non-Contact Marking: No Bits Needed
- Etch, Polish and Anneal with One System
- Network the Laser Across Your Business
- High Volume, Multi-Piece Marking
- Mark and Etch a Wide Variety of Materials
FREE EPILOG BROCHURE
HIgh Speed Stepper Motors
3D Engraving Mode
Drop Down Door
Front access door for easy access to the Epilog Zing 24 laser system.
Quick Connect™ system
Long-Life Lenses
CO2 Waveguide Laser Tubes
A combination of metal/ceramic tube design provides higher beam quality and longer life with low recharge costs.
Epilog Zing 16 Laser: The entry-level model in our laser product line, the Epilog Zing 16 provides a 16″ x 12″ work area, but with the highest-quality engraving. The small format, low cost, high-quality laser system by Epilog Laser. There is no skimping here – all-metal chassis, high-end components, and the engraving quality that Epilog Laser is known for. All of this, and Made in the USA too! | |
Epilog Zing 24 Laser: Move up to the Epilog Zing 24 for a larger work area (24″ x 12″) that holds most standard engraving stock material. A larger work area and more features make this laser an affordable choice for those needing more features than an entry-level machine. With a large 24″ x 12″ (610 x 305 mm) work area, you’ll be able to easily fit the most common size for engravable materials, and power choices of up to 60 watts |
- 30 watts (CO2)
- 40 watts (CO2)
- 50 watts (CO2)
- 60 watts (CO2)
- Intelligent Memory Capacity
- Air Assist
- Laser Dashboard
- Red Dot Pointer
- Relocatable Home
- High-Speed Parts Marking Over a Larger Work Area
- Open Architecture Software Interface
- Non-Contact Marking: No Bits Needed
- Etch, Polish and Anneal with One System
- Network the Laser Across Your Business
- High Volume, Multi-Piece Marking
- Mark and Etch a Wide Variety of Materials
Rotary Attachments for Cylindrical ItemsIntroducing the Zing 24 Laser Rotary Attachment! Now you can engrave wine bottles, mugs, glasses, flashlights or any other cylindrical item up to 5.25″ (133.4 mm) in diameter on the Epilog Zing Laser. So intuitive and easy to use, you can switch from one glass to the next in seconds – without even removing the attachment from the engraver! In addition, our proprietary design provides accurate image scaling, so there’s no need to input diameter or circumference calculations. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser! *The Rotary Attachment is not available for the Zing 16.* | |
PhotoLaser Plus SoftwarePhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials. Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers? Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry. | |
Vector Cutting GridThe Vector Cutting Grid on the Epilog Zing laser is used to lift materials being cut above the work surface. This allows the laser beam to pass cleanly through the material you are cutting and dramatically reduces underside reflections. The |
Epilog Zing 16 | Epilog Zing 24 | |
Engraving Area | 16″ x 12″ (406 x 305 mm) | 24″ x 12″ (610 x 305 mm) |
Max. Material Thickness | 4.5″ (114 mm) | 7.75″ (197 mm) |
Laser Wattage | 30 or 40 watts | 30, 40, 50, or 60 watts |
Laser Source | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
Size (W x D x H) | 28.75″ x 22.125” x 11.75” (730 x 562 x 298 mm) | 38″ x 27.25″ x 15″ (965 x 692 x 381 mm) |
Weight | 95 lbs (43 kg) | 140 lbs (64 kg) |
Maximum Table Weight | The Zing 16 and 24 have a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg). | The Zing 16 and 24 have a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg). |
Electrical Requirements | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
Epilog Zing 16 Laser: The entry-level model in our laser product line, the Epilog Zing 16 provides a 16″ x 12″ work area, but with the highest-quality engraving. The small format, low cost, high-quality laser system by Epilog Laser. There is no skimping here – all-metal chassis, high-end components, and the engraving quality that Epilog Laser is known for. All of this, and Made in the USA too! |
Epilog Zing 24 Laser: Move up to the Epilog Zing 24 for a larger work area (24″ x 12″) that holds most standard engraving stock material. A larger work area and more features make this laser an affordable choice for those needing more features than an entry-level machine. With a large 24″ x 12″ (610 x 305 mm) work area, you’ll be able to easily fit the most common size for engravable materials, and power choices of up to 60 watts |
- 30 watts (CO2)
- 40 watts (CO2)
- 50 watts (CO2)
- 60 watts (CO2)
- Intelligent Memory Capacity
- Air Assist
- Laser Dashboard
- Red Dot Pointer
- Relocatable Home
- High-Speed Parts Marking Over a Larger Work Area
- Open Architecture Software Interface
- Non-Contact Marking: No Bits Needed
- Etch, Polish and Anneal with One System
- Network the Laser Across Your Business
- High Volume, Multi-Piece Marking
- Mark and Etch a Wide Variety of Materials
Rotary Attachments for Cylindrical ItemsIntroducing the Zing 24 Laser Rotary Attachment! Now you can engrave wine bottles, mugs, glasses, flashlights or any other cylindrical item up to 5.25″ (133.4 mm) in diameter on the Epilog Zing Laser. So intuitive and easy to use, you can switch from one glass to the next in seconds – without even removing the attachment from the engraver! In addition, our proprietary design provides accurate image scaling, so there’s no need to input diameter or circumference calculations. Setup is as easy as placing your product on the Rotary Attachment, raising or lowering the scissor lift to level the engraving area, and printing to the laser! *The Rotary Attachment is not available for the Zing 16.* |
PhotoLaser Plus SoftwarePhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials. Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers? Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry. |
Vector Cutting GridThe Vector Cutting Grid on the Epilog Zing laser is used to lift materials being cut above the work surface. This allows the laser beam to pass cleanly through the material you are cutting and dramatically reduces underside reflections. The |