Epilog Fusion Pro Laser Series

Introducing the fastest laser engraving systems on the market. Performance and image quality are at the heart of the Fusion Pro line of laser systems. With a maximum speed of 165 inches/second, and featuring 5g acceleration, the Fusion Pro Lasers are the fastest, most productive laser systems available. Whether you’re engraving wood, plastic, coated metals or glass, the Fusion Pro allows you to produce more product in less time than any competitive system.

All Epilog Laser Systems are 100% designed, engineered and built in the USA.

STANDARD FEATURES

  • Highest-Speed Engraving Over Largest Work Area
  • IRIS™ Camera Positioning
  • Touch Screen at the Laser
  • SAFEGUARD™ Features
  • RADIANCE™ Beam Enhancing Optics
  • SUPER-SILENT™ Cooling Fans
  • CO2 Waveguide Laser Tubes by Epilog
  • Superior Chassis Strength
  • Joystick Controls
  • Advanced Motion Control
  • Flame Polished Edge Cuts
  • Temperature Sensor/Emergency Stop Button
  • Motorized Table

IRIS™ Camera Positioning

Overhead cameras provide an accurate picture of the working area for accurate artwork placement, and a camera at the lens allows the system to find preprinted registration marks.

Network Your Laser Across Your Business

The Fusion Pro features built-in Ethernet, USB, and a new wireless connection for more options for networking your laser.

Touch Screen at the Laser

Select between jobs, change settings, and more right from the easy-to-use touch screen interface right at the laser. Rerun jobs at the touch of a button.

SAFEGUARD™ Features

Keep the mechanics of your laser machine cleaner than ever before with side bellow enclosures, a fully covered x-axis assembly, and covered lens assembly.

Highest-Speed Engraving Over Largest Work Area

The Fusion Pro’s 165 IPS engraving speed and 5G acceleration combine to provide the fastest engraving in the industry.

Table Choices

Choose between a flat engraving bed, cutting table, and slat cutting table for more options. The table is in two sections, allowing you to mix and match your table across the bed.

Epilog Fusion Pro 24 Laser

Introducing the new Epilog Fusion Pro 24 Model. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allows you to precisely place your artwork on screen in seconds.

24” x 24” (610 x 610 mm)

Epilog Fusion Pro 32 Laser

Introducing the new Epilog Fusion Pro. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allows you to precisely place your artwork on screen in seconds.

32” x 20” (812 x 508 mm) work area

Epilog Fusion Pro 36 Laser

Introducing the new Epilog Fusion Pro 36 Model. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allows you to precisely place your artwork on screen in seconds.

36” x 24” (914 x 610 mm) work area

Epilog Fusion Pro 48 Laser

Introducing the new Epilog Fusion Pro. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allow you to precisely place your artwork on screen in seconds.

48” x 36” (1219 x 914 mm) work area

 

  • Highest-Speed Engraving Over Largest Work Area
  • IRIS™ Camera Positioning
  • Touch Screen at the Laser
  • Engineered and Manufactured in the USA
  • Network Your Laser Across Your Business
  • SAFEGUARD™ Features
  • Air Assist and Compressor
  • Table Choices
  • RADIANCE™ Beam Enhancing Optics
  • SUPER-SILENT™ Cooling Fans
  • CO2 Waveguide Laser Tubes by Epilog
  • Long-Lasting Steel Bearings
  • Strong, Long-Lasting Drive Belts
  • Superior Chassis Strength
  • Joystick Controls
  • Advanced Motion Control
  • Flame Polished Edge Cuts
  • Temperature Sensor/Emergency Stop Button
  • Motorized Table

Dual Source Option: CO2 and Fiber

Are you looking for the material versatility of a CO2 laser in addition to the direct metal etching of a fiber laser? Add on the dual source option to your Fusion Pro by choosing both a CO2 laser (50, 60, or 75 watts) and a fiber laser (30 or 50 watts) to work with a wider range of materials.

Rim-Style Rotary Attachment

Available for the Fusion Pro, the Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The Fusion Pro rotary attachment is as easy to setup as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.

 

3-Jaw Chuck Rotary Attachment

The Fusion Pro 3-Jaw Chuck mechanically clamps a cylinder or oddly-shaped, non-cylindrical item in place as the laser engraves. It is the perfect accessory when your engraving requires extremely precise positioning on your cylindrical items.

PhotoLaser Plus Software

PhotoLaser Plus takes photo engraving with your Epilog Fusion Series laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

Cutting Pin Table

The Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.

Optional Lenses

In addition to the 2.0″ lens (or 3.0″ lens on the dual source), we offer special lenses for specific applications.

1.5″ Lens: Highest-Resolution Engraving

Although the standard 2” lens provides amazing detail, our 1.5” lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts.

4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas

The 4” lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.

Cone Lens: Deep Cutting with the Laser 

 

The cone design pushes the stream from the Air Assist directly down through the cut, rather than over the surface of the engraving material. This provides even better reduction of laser flare-ups and better edge quality.

 

 

Epilog Fusion Pro 24Epilog Fusion Pro 32

CO2: 50, 60, or 80 watts

Fiber: 30 or 50 watts

Dual source configurations available

CO2:  50, 60, 80, or 120 watts

Fiber: 30 or 50 watts

Dual source configurations available

Epilog Fusion Pro 36Epilog Fusion Pro 48

CO2: 50, 60, or 80 watts

Fiber: n/a

Dual source configurations available

CO2:  50, 60, 80, or 120 watts

Fiber: 30 or 50 watts

Dual source configurations available

 Fusion Pro 24Fusion Pro 36Fusion Pro 48
Work Area24” x 24”
(610 x 610 mm)
36” x 24”
(914 x 610 mm)
48” x 36”
(1219 x 914 mm)
Maximum Z-Depth9” (228 mm)9” (228 mm)12.25” (311 mm)
Laser Tube Wattage

CO2 – 50, 60, or 80 watt

  • air-cooled, metal/ceramic tube, 10.6 micrometers

Fiber – 30 or 50 watt

  • air-cooled, includes collimator, 1065 nm, Beam quality: M2 < 1.1

Dual Source – CO2 50, 60, or 80 watt with Fiber 30 or 50 watt

CO2 – 50, 60, or 80 watt

  • air-cooled, metal/ceramic tube, 10.6 micrometers

Dual Source – CO2 50, 60, or 80 watt with Fiber 30 or 50 watt

CO2 – 50, 60, 80, or 120 watt

  • air-cooled, metal/ceramic tube, 10.6 micrometers

Fiber – 30 or 50 watt

  • air-cooled, includes collimator, 1065 nm, Beam quality: M2 < 1.1

Dual Source – CO2 50, 60, 80, or 120 watt with Fiber 30 or 50 watt

Included Lens2″ – CO2
3″ – Fiber & Dual-Source
Optional Lenses4″ – CO2
Included TableVector Cutting Table (Grid-Style)Task Plate
Air Assist PumpOptionalOptionalIncluded
Status LightIncludedn/a
SoftwareEpilog Laser Software Suite: Laser Dashboard™ & Epilog Job Manager™
MemoryMultiple files up to 1 GB. Engrave any file size.
Operating ModesOptimized Raster, Vector, and Combined modes
Motion ControlHigh-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning
X-Axis BearingsGround & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity
BeltsAdvanced B-style double-wide Kevlar precision drive belts.
ResolutionFully-flexible and user-controlled from 75 – 1200 dpi
Speed and Power165 IPS (4.2m/s) with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode.
Print Interface10Base-T Ethernet, USB. Windows 7/8/10 compatible
Size (W x D x H)41.52” x 32.81” x 40.54″
1055 x 834 x 1029 mm
53.52” x 32.81” x 40.54″
1359 x 834 x 1029 mm
70.6” x 51.3″ x 42.75″
1794 x 1304 x 1086 mm
Pedestal removed: 34” H (863 mm)
Weight240 lbs (108 kg)275 lbs (124 kg)650 lbs (295 kg)
Electrical110 to 240 volts, 50 or 60 Hz, single phase240 volts, 50 or 60 Hz, single phase
Ventilation350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4″ (102 mm) diameterThree total ports. Two upper exhaust ports, one lower vacuum table port. Total 735 CFM required. All ports 4” (102mm).
SafetyClass 2 Laser Product – 1 mW CW Maximum 600 – 700 nm

 

 Epilog Fusion Pro 32
Work Area32” x 20”
(812 x 508 mm)
Maximum Z-Depth12.25” (311 mm)
Laser Tube Wattage

CO2 – 50, 60, 80, or 120 watt

  • air-cooled, combined metal/ceramic Waveguide tube, 10.6 micrometers

Fiber – 30 or 50 watt

  • air-cooled, includes collimator, 1065 nm, Beam quality: M2 < 1.1
SoftwareEpilog Laser Software Suite: Laser Dashboard & Epilog Job Manager
MemoryMultiple files up to 1 GB. Engrave any file size.
Operating ModesOptimized Raster, Vector, and Combined Modes
Motion ControlHigh-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning
X-Axis BearingsGround & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity
BeltsAdvanced B-Style Kevlar belts (x-axis) and steel cord (y-axis)
ResolutionFully-flexible and user-controlled from 75 – 1200 dpi
Speed and PowerComputer-controlled in .001 increments up to 100%
Print Interface10Base-T Ethernet, USB, or Wireless connection. Windows XP/Vista/7/8/10 compatible
Size (W x D x H)54.6” x 34.2” x 42″
1387 x 869 x 1067 mm
Weight400 lbs (182 kg)
Electrical240 volts, 50 or 60 Hz, single phase
Ventilation650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration unit required. Three output ports, 4” (102 mm) diameter.
Exhaust PortsOne output port
4” (102 mm)
Vacuum Table PortAdditional port for dedicated exhaust through table, 4” (102 mm)
SafetyClass 2 Laser Product – 1 mW CW Maximum 600 – 700 nm

 

Epilog Fusion Pro 24 Laser

Introducing the new Epilog Fusion Pro 24 Model. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allows you to precisely place your artwork on screen in seconds.

24” x 24” (610 x 610 mm)

 

Epilog Fusion Pro 48 Laser

Introducing the new Epilog Fusion Pro. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allow you to precisely place your artwork on screen in seconds.

48” x 36” (1219 x 914 mm) work area

Epilog Fusion Pro 36 Laser

Introducing the new Epilog Fusion Pro 36 Model. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allows you to precisely place your artwork on screen in seconds.

36” x 24” (914 x 610 mm) work area

Epilog Fusion Pro 48 Laser

Introducing the new Epilog Fusion Pro. 5G acceleration and 165 IPS engraving speeds provide the fastest engraving in the industry. And the IRIS™ Camera Positioning system allow you to precisely place your artwork on screen in seconds.

48” x 36” (1219 x 914 mm) work area

 

 

  • Highest-Speed Engraving Over Largest Work Area
  • IRIS™ Camera Positioning
  • Touch Screen at the Laser
  • Engineered and Manufactured in the USA
  • Network Your Laser Across Your Business
  • SAFEGUARD™ Features
  • Air Assist and Compressor
  • Table Choices
  • RADIANCE™ Beam Enhancing Optics
  • SUPER-SILENT™ Cooling Fans
  • CO2 Waveguide Laser Tubes by Epilog
  • Long-Lasting Steel Bearings
  • Strong, Long-Lasting Drive Belts
  • Superior Chassis Strength
  • Joystick Controls
  • Advanced Motion Control
  • Flame Polished Edge Cuts
  • Temperature Sensor/Emergency Stop Button
  • Motorized Table


Dual Source Option: CO2 and Fiber

Are you looking for the material versatility of a CO2 laser in addition to the direct metal etching of a fiber laser? Add on the dual source option to your Fusion Pro by choosing both a CO2 laser (50, 60, or 75 watts) and a fiber laser (30 or 50 watts) to work with a wider range of materials.

Rim-Style Rotary Attachment

Available for the Fusion Pro, the Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The Fusion Pro rotary attachment is as easy to setup as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.

3-JawChuck Rotary Attachment

The Fusion Pro 3-Jaw Chuck mechanically clamps a cylinder or oddly-shaped, non-cylindrical item in place as the laser engraves. It is the perfect accessory when your engraving requires extremely precise positioning on your cylindrical items.

PhotoLaser Plus Software

PhotoLaser Plus takes photo engraving with your Epilog Fusion Series laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

Cutting Pin Table

The Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.

 

 

 

 

Optional Lenses

In addition to the 2.0″ lens (or 3.0″ lens on the dual source), we offer special lenses for specific applications.

1.5″ Lens: Highest-Resolution Engraving

Although the standard 2” lens provides amazing detail, our 1.5” lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts.

4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas

The 4” lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.

 

Cone Lens: Deep Cutting with the Laser

The cone design pushes the stream from the Air Assist directly down through the cut, rather than over the surface of the engraving material. This provides even better reduction of laser flare-ups and better edge quality.

 

Epilog Fusion Pro 24Epilog Fusion Pro 32

CO2: 50, 60, or 80 watts

Fiber: 30 or 50 watts

Dual source configurations available

CO2:  50, 60, 80, or 120 watts

Fiber: 30 or 50 watts

Dual source configurations available

Epilog Fusion Pro 36Epilog Fusion Pro 48

CO2: 50, 60, or 80 watts

Fiber: n/a

Dual source configurations available

CO2:  50, 60, 80, or 120 watts

Fiber: 30 or 50 watts

Dual source configurations available

 Fusion Pro 24Fusion Pro 36Fusion Pro 48
Work Area24” x 24”
(610 x 610 mm)
36” x 24”
(914 x 610 mm)
48” x 36”
(1219 x 914 mm)
Maximum Z-Depth9” (228 mm)9” (228 mm)12.25” (311 mm)
Laser Tube Wattage

CO2 – 50, 60, or 80 watt

  • air-cooled, metal/ceramic tube, 10.6 micrometers

Fiber – 30 or 50 watt

  • air-cooled, includes collimator, 1065 nm, Beam quality: M2 < 1.1

Dual Source – CO2 50, 60, or 80 watt with Fiber 30 or 50 watt

CO2 – 50, 60, or 80 watt

  • air-cooled, metal/ceramic tube, 10.6 micrometers

Dual Source – CO2 50, 60, or 80 watt with Fiber 30 or 50 watt

CO2 – 50, 60, 80, or 120 watt

  • air-cooled, metal/ceramic tube, 10.6 micrometers

Fiber – 30 or 50 watt

  • air-cooled, includes collimator, 1065 nm, Beam quality: M2 < 1.1

Dual Source – CO2 50, 60, 80, or 120 watt with Fiber 30 or 50 watt

Included Lens2″ – CO2
3″ – Fiber & Dual-Source
Optional Lenses4″ – CO2
Included TableVector Cutting Table (Grid-Style)Task Plate
Air Assist PumpOptionalOptionalIncluded
Status LightIncludedn/a
SoftwareEpilog Laser Software Suite: Laser Dashboard™ & Epilog Job Manager™
MemoryMultiple files up to 1 GB. Engrave any file size.
Operating ModesOptimized Raster, Vector, and Combined modes
Motion ControlHigh-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning
X-Axis BearingsGround & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity
BeltsAdvanced B-style double-wide Kevlar precision drive belts.
ResolutionFully-flexible and user-controlled from 75 – 1200 dpi
Speed and Power165 IPS (4.2m/s) with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode.
Print Interface10Base-T Ethernet, USB. Windows 7/8/10 compatible
Size (W x D x H)41.52” x 32.81” x 40.54″
1055 x 834 x 1029 mm
53.52” x 32.81” x 40.54″
1359 x 834 x 1029 mm
70.6” x 51.3″ x 42.75″
1794 x 1304 x 1086 mm
Pedestal removed: 34” H (863 mm)
Weight240 lbs (108 kg)275 lbs (124 kg)650 lbs (295 kg)
Electrical110 to 240 volts, 50 or 60 Hz, single phase240 volts, 50 or 60 Hz, single phase
Ventilation350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4″ (102 mm) diameterThree total ports. Two upper exhaust ports, one lower vacuum table port. Total 735 CFM required. All ports 4” (102mm).
SafetyClass 2 Laser Product – 1 mW CW Maximum 600 – 700 nm

 

 Epilog Fusion Pro 32
Work Area32” x 20”
(812 x 508 mm)
Maximum Z-Depth12.25” (311 mm)
Laser Tube Wattage

CO2 – 50, 60, 80, or 120 watt

  • air-cooled, combined metal/ceramic Waveguide tube, 10.6 micrometers

Fiber – 30 or 50 watt

  • air-cooled, includes collimator, 1065 nm, Beam quality: M2 < 1.1
SoftwareEpilog Laser Software Suite: Laser Dashboard & Epilog Job Manager
MemoryMultiple files up to 1 GB. Engrave any file size.
Operating ModesOptimized Raster, Vector, and Combined Modes
Motion ControlHigh-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning
X-Axis BearingsGround & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity
BeltsAdvanced B-Style Kevlar belts (x-axis) and steel cord (y-axis)
ResolutionFully-flexible and user-controlled from 75 – 1200 dpi
Speed and PowerComputer-controlled in .001 increments up to 100%
Print Interface10Base-T Ethernet, USB, or Wireless connection. Windows XP/Vista/7/8/10 compatible
Size (W x D x H)54.6” x 34.2” x 42″
1387 x 869 x 1067 mm
Weight400 lbs (182 kg)
Electrical240 volts, 50 or 60 Hz, single phase
Ventilation650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration unit required. Three output ports, 4” (102 mm) diameter.
Exhaust PortsOne output port
4” (102 mm)
Vacuum Table PortAdditional port for dedicated exhaust through table, 4” (102 mm)
SafetyClass 2 Laser Product – 1 mW CW Maximum 600 – 700 nm

 

REQUEST A QUOTE

15 + 9 =

FREE DOWNLOAD

WHICH EPILOG LASER SYSTEM IS FOR YOU?

Browse Epilog Laser's full product line to see which laser system is suitable for your needs. Includes list of all laserable materials, system sizes, tech specs and more.  

You have Successfully Subscribed!