You are here: Home » Epilog Laser » Legend Laser Series

Legend Elite Laser Series

The Legend Elite Series features our top-of-the-line CO2 laser systems and is utilized by customers for the highest-quality engraving and cutting of wood, acrylics, plastics, stone, and much more.

Find out why the Legend Elite Series – from the small format Mini 18 and Mini 24 to the mid-sized Helix 24T – is the number one choice for engravers worldwide with the highest quality motion control system and most features on the market.

GET A QUOTE

STANDARD FEATURES

Intelligent Memory Capacity
Air Assist
Laser Dashboard
Red Dot Pointer
Relocatable Home
Motion Control System
Speed and Power Control
High-Speed Parts Marking
Larger Work Area
Open Architecture Software Interface
Non-Contact Marking: No Bits Needed
Etch, Polish and Anneal with One System
Network the Laser Across Your Business
High Volume, Multi-Piece Marking
Mark and Etch a Wide Variety of Materials

FREE EPILOG BROCHURE

Instant Download

Super-Silent™ Cooling Fans

With computer-controlled cooling fans, the Legend series is the quietest-operating laser system.

Drop Down Doors

Front access door for easy access to the Epilog Zing 24 laser system.

Accupoint™ Motion Control System

The motion control provides higher detail engraving, even at the fastest speeds.

Vacuum Table

This built-in method of securely holding thin sheet stock in place is a large benefit to engravers, as it eliminates the need for double-sided tape.

RADIANCE™ Higher Resolution Optics

No additional, expensive lens package needed for the highest resolution engraving (Mini 24/Helix).

High-Speed Servo Motors

Known for their incredibly fast acceleration/ deceleration and faster turnaround speeds on each engraved line.

Epilog Mini 18: The entry-level model in our Legend Elite Series provides an 18″ x 12″ (457 x 305 mm) work area. Though it’s more compact, the engraving and cutting results are the same high quality as our large-format lasers.

Epilog Mini 24: Move up to the Mini 24 for a larger 24″ x 12″ (610 x 305 mm) work area that holds most standard engraving stock material.

Epilog Helix 24: The Helix 24 features a larger 24″ x 18″ (610 x 457 mm) work area and a 8.5” (216 mm) z-stroke, which allows for engraving large/tall items.

30 watts (CO2)
40 watts (CO2)
50 watts (CO2)
60 watts (CO2)
75 watts (CO2)

Intelligent Memory Capacity
Air Assist
Laser Dashboard
Red Dot Pointer
Relocatable Home
Motion Control System
Speed and Power Control
High-Speed Parts Marking Over a Larger Work Area
Open Architecture Software Interface
Non-Contact Marking: No Bits Needed
Etch, Polish and Anneal with One System
Network the Laser Across Your Business
High Volume, Multi-Piece Marking
Mark and Etch a Wide Variety of Materials

	Rotary Attachments for Cylindrical Items Available for all Epilog Legend systems, the Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, and other cylindrical items. Specially designed for our entire line of Legend lasers, it has been built to accommodate a large variety of shapes and sizes. The attachment easily adjusts for different lengths and will even rotate cylinders that have different diameters on each end. So intuitive and easy to use, you can change from one glass to the next in seconds without removing the attachment from the engraver. Additionally, our proprietary design provides accurate image scaling without the need to input diameter or circumference calculations.
	PhotoLaser Plus Software PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials. Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers? Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.
	Optional Lenses 1.5″ Lens: Highest-Resolution Engraving Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts. 4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas The 4.0 inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.
	Epilog Mini Stand While the Helix comes with an included stand, the Mini 18 and Mini 24 are desktop units with an optional stand. If you prefer to have a free-standing system, you can add this wheeled cart specially designed for the Mini Laser line to your machine. It allows you to quickly move your machine throughout your work environment
	Vector Pin Table The Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handily removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.
	Air Compressor Epilog’s optional Air Compressor is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area. This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and the connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

	Epilog Mini 18	Epilog Mini 24	Epilog Helix 24
Engraving Area	18″ x 12″ (457 x 305 mm)	24″ x 12″ (610 x 305 mm)	24″ x 18″ (610 x 457 mm)
Max. Material Thickness	4″ (102 mm)	5.5″ (140 mm)	8.5″ (216 mm)
Maximum Material Thickness with Table Removed	6″ (152 mm) with a 17.5″ x 10″ (445 x 254 mm) engraving area.	8″ (203 mm) with a 23.5″ x 11.75″ (597 x 298 mm) engraving area.	11″ (279 mm) with a 23.5″ x 17″ (597 x 432 mm) engraving area.
Print Interface	10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.	10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.	10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.
Laser Wattage	30 or 40 watts	30, 40, 50, or 60 watts	30, 40, 50, 60, or 75 watts
Laser Source	State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.	State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.	State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Size (W x D x H)	27.8″ x 26″ x 13.5″ (706 x 660 x 343 mm)	34.5″ x 26″ x 16″ (876 x 660 x 406 mm)	36.5″ x 32″ x 39.8″ (927 x 813 x 1011 mm)
Weight	70 lbs (32 kg) 100 lbs (45.5 kg) w/stand	90 lbs (41 kg) 120 lbs (55 kg) w/stand	180 lbs (82 kg)
Maximum Table Weight	The Mini 18 and 24 have a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg).	The Mini 18 and 24 have a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg).	The Helix 24 has a static table weight of 70 lbs (32 kg) and a lifting table weight of 30 lbs (14 kg).

Epilog Mini 24: Move up to the Mini 24 for a larger 24″ x 12″ (610 x 305 mm) work area that holds most standard engraving stock material.

Epilog Helix 24: The Helix 24 features a larger 24″ x 18″ (610 x 457 mm) work area and a 8.5” (216 mm) z-stroke, which allows for engraving large/tall items.

30 watts (CO2)
40 watts (CO2)
50 watts (CO2)
60 watts (CO2)
75 watts (CO2)

Intelligent Memory Capacity
Air Assist
Laser Dashboard
Red Dot Pointer
Relocatable Home
Motion Control System
Speed and Power Control
High-Speed Parts Marking Over a Larger Work Area
Open Architecture Software Interface
Non-Contact Marking: No Bits Needed
Etch, Polish and Anneal with One System
Network the Laser Across Your Business
High Volume, Multi-Piece Marking
Mark and Etch a Wide Variety of Materials

Rotary Attachments for Cylindrical Items

Available for all Epilog Legend systems, the Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, and other cylindrical items.

Specially designed for our entire line of Legend lasers, it has been built to accommodate a large variety of shapes and sizes. The attachment easily adjusts for different lengths and will even rotate cylinders that have different diameters on each end.

So intuitive and easy to use, you can change from one glass to the next in seconds without removing the attachment from the engraver. Additionally, our proprietary design provides accurate image scaling without the need to input diameter or circumference calculations.

PhotoLaser Plus Software

PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials.

Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers? Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

Optional Lenses

1.5″ Lens: Highest-Resolution Engraving

Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts.

4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas

The 4.0 inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.

Epilog Mini Stand

While the Helix comes with an included stand, the Mini 18 and Mini 24 are desktop units with an optional stand. If you prefer to have a free-standing system, you can add this wheeled cart specially designed for the Mini Laser line to your machine. It allows you to quickly move your machine throughout your work environment

Vector Pin Table

The Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handily removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.

Air Compressor

Epilog’s optional Air Compressor is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.

This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and the connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

Click to view Legend Laser Series Tech Data

Legend Elite Laser Series

STANDARD FEATURES